- The PDU automatically sequences each output,
this greatly reduces the total in-rush current and
limits the possibility of equipment damage due to
the combined turn-on transient of several loads.
The sequence order and delay is user defined
at set up.
- The PDU features a power-on current limit
preventing the circuit breaker from tripping
during power up.
- Power control capability to groups of outlets.
- Remote operation/control capability by means
of a Telnet or web option, RS-232 console port.
- Local operation/control capability by means of
front panel push-button switch and back lighted
LED status indicator.
- Monitors input line voltage, total load current, line
frequency and remote (external) temperature with
optional temperature sensor.
- Two isolated contact inputs can be used with
alarm sensors, security sensors, limit switches,
and/or remote stop. Emergency E-Stop
configuration also possible.
- The AC SMARTstart Jr. may be used as a
master PDU with several slaves linked via
RS-485/422 or RS-232.
|
 |
| RS-232 Windows configuration and control utility |
|
 Web/Telnet options:
|
- Enhanced web-based device set-up and control management.
- Auto Ping feature to test and optionally power cycle a connected host.
- Email alerts to up to three designated recipients.
- Optional sensors can be incorporated and included in alarm email alerts with user defined messages.
- SNMP MIB for standards-based monitoring and control of the power distribution unit and its associated operating features.
- "Device Organizer" to manage multiple active PDU's from a single PC.
|
|
|
| |
- Two user programmable external contacts can
be configured to alert user of under-voltage,
over-current, or over-temperature conditions
using the dry contact closure. These contacts
allow remote operation and control from web
browser or telnet interface.
- Slim 1.75" tall (1RU), 19" wide rack-mount cabinet
with optional front or center mounting brackets.
- Over-current protected, with front panel-mounted
circuit breaker(s) that may also be used as a switch.
- Complies to FCC and CE, UL, TÜV requirements.
|
|
Spectrum Control, Inc. All Rights Reserved
